Slayer, Rockup, Mini Driver wanted

Looking for that special stick? Post an ad in here for things you are after!

Slayer, Rockup, Mini Driver wanted

Postby MarkyD » Sat Jan 19, 2013 8:46 pm

Any of the following wanted :-
Rusty Slayer, Lost Rockup, Lost Mini Driver (Firewire or otherwise) in size 5 8- 5 10 Volume 26/27 litres

Thank you
M
MarkyD
 
Posts: 61
Joined: Sun Sep 19, 2010 6:36 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby prjwebb » Mon Jan 21, 2013 3:31 pm

I've got a 510 x 19.25" x 2.38" - 27.8l Firewire Mini Driver.

I'm not really looking to sell it in all fairness but if the offer was right I'd consider it...
prjwebb
 
Posts: 444
Joined: Wed Feb 02, 2011 1:31 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby sandman » Mon Jan 21, 2013 7:55 pm

Have a look at the Fourth Doofer. I just got a 5'9 1/2 , 27.5ltrs and its exactly what your looking for. Not selling mine but well worth a look. Mines 5 fin custom
sandman
 
Posts: 433
Joined: Sat Feb 06, 2010 7:34 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby MarkyD » Tue Jan 22, 2013 8:01 am

prjwebb is that a stock sizeboard ? I was hoping a few Mini Drivers would be hitting the s/h market by now.
Thanks sandman I nearly looked at what they offer as Fourth seem to have their version of Brand name board models whilst undercutting price. Seen several shovel models here and they are well liked and seem to last.
MarkyD
 
Posts: 61
Joined: Sun Sep 19, 2010 6:36 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby sandman » Tue Jan 22, 2013 9:25 am

I don't work for them or anything I'm just very impressed. If you want I will email you pix. Mines been surfed about 20x and no pressure dings or anything. £400 custom as well. I think they do a very similar mini driver type board as well. Go for a Doofer.
sandman
 
Posts: 433
Joined: Sat Feb 06, 2010 7:34 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby prjwebb » Tue Jan 22, 2013 2:44 pm

MarkyD wrote:prjwebb is that a stock sizeboard ? I was hoping a few Mini Drivers would be hitting the s/h market by now.
Thanks sandman I nearly looked at what they offer as Fourth seem to have their version of Brand name board models whilst undercutting price. Seen several shovel models here and they are well liked and seem to last.


Yeah the stock sizing. The FST version runs .25" narrower than the stock Poly version.
prjwebb
 
Posts: 444
Joined: Wed Feb 02, 2011 1:31 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby MarkyD » Tue Jan 22, 2013 8:36 pm

prjwebb, what sort of price we talking? Condition? PM me if you want. Had a Lost SD2 way back which was good up to head high so rate the Lost boards.
sandman thanks I will investigate further. May need to get a stock size sent to have look at one. Now that Gwizz have gone bust know of any cheap/good courier or reseller if I go this route and need to send back?
Really liking my Maurice Cole Metro and Protow but also found this type of board useful.
Mark
MarkyD
 
Posts: 61
Joined: Sun Sep 19, 2010 6:36 pm

Re: Slayer, Rockup, Mini Driver wanted

Postby defever » Wed Feb 13, 2013 9:54 pm

Hello Marky,

Are you sorted? If not you might be interested in my Luke Youn Mini Zero 5'10" x 19" 1/4 x 2" 5/16.

Very similar to Mini Diver, but with a rounded square tail.

Just a thought!
defever
 
Posts: 777
Joined: Tue Mar 13, 2012 5:03 pm


Return to Wanted

Who is online

Users browsing this forum: No registered users and 1 guest